Electronics * | Hobbywing Xrotor Micro 4In1 Esc & F4 G3 Flight Controller Combo

The Hobbywing Xrotor Micro 4-In-1 Esc And F4 G3 Flight Controller Combo Is Composed Of Hwa31003001 & Hwa30902063 .

• Stm32 F405 Mcu.
• Board Load 12V Bec, The Output Current Can Reach 2A. It Can Supply Power For Graphic Transmission, 12V Led Lamp And Other Equipment
• The Spi Icm-20602 Which Integrates Accelerometer And Gyro (With The Running Frequency Can Be Set To 32Khz) Is Adopted
• Onboard Osd Microchip Which Supports The Dma Mode Allows Users To Adjust Its Parameters Via The Betaflight Software (Note: The Osd Is Controlled By The F4 Mcu)
• The Fc Which Supports Betaflight Firmware & Allows Parameter Adjustment Via Betaflight Software Is More Applicable To Fpv Race
• F-Card Which Can Record And Save More Flight/Black Box Data Allows Users To Adjust Thesetup Of Their Aircraft Easily
• Compatible With Various Receivers Like Sbus, Sumh, Sumd, Spektrum1024/2048, Xbus, Ppm And Etc
• Led Strip Signal Output Port Allows Users To Adjust The Color & Flash Mode Of The Led Strip Via The Fc
• Volt/Amp Monitoring Port Allows Users To Check The Battery Voltage (Bat Port) And Current (Crt Port , Extra Current Meter Is Needed)
• Buzzer Output Port Allows Users To Connect External Buzzer(S) To The Fc For Warning Or Informing The Flight Status Of The Aircraft
• Micro Usb Port Allows Users To Connect The Fc To A Pc To Flash Firmware And Adjust Parameters
• Switch Module Of Board Load Graphic Transmission(Vtx) Can Use Remote Contorl To Control Switch Of Graphic Transmission