Electronics * | Futaba 18Sz 2.4Ghz Fasst Telemetry Radio System (Airplane) W/R7008Sb Receiver

This Is The Futaba 2.4Ghz 18Sza 18-Channel Telemetry Airplane Radio System With The R7008Sb Telemetry Receiver. Servos Not Included This Is The Airplane Version Which Will Default To Airplane Settings When Powered Up And Has A Ratcheted Throttle Stick. 10/17 Updates Include The Following; Telemetry Display Timer Alarm Model Select (Fx-32) Data Converter Butterfly Elevator Butterfly Mixing Butterfly Differential Failsafe (Fasst-7Ch) For All Updates Check .Html Airplane Features; 13 Wing Types 2 Rudder Types 3 Tail Types Flap Setting Aileron Differential Aileron To Camber Flap Mix Aileron To Brake Flap Mix Aileron To Rudder Mix Aileron To Elevator Mix Rudder To Aileron Mix Rudder To Elevator Mix Camber Mix Elevator To Camber Mix Camber Flap To Elevator Mix Snap Roll Airbrake Mix V-Tail Ailevator Winglet Motor Mix Multi-Engine Gyro Sensor Helicopter Features; 8 Swash Types Pitch Throttle Curve Pitch Throttle Curve Pitch Throttle Curve Mode (3) Acceleration 17 Point Pitch/Throttle Curve Throttle Hold Swash Mixing Throttle Mixing Pitch To Needle Mixing Pitch To Rudder Mixing Gyro Sensor (3) Governor Condition Hold Hovering Pitch Hovering Throttle Swash Afr Swash Setting Swash Ring Throttle Limiter Glider Features; 13 Wing Types Aileron Differential 3 Tail Types Aileron To Camber Flap Mix 2 Rudder Types Aileron To Brake Flap Mix Flap Setting Camber Mix Aileron To Rudder Mix Elevator To Camber Mix Rudder To Aileron Mix Camber Flap To Elevator Mix Airbrake To Elevator Mix Butterfly Mixing Trim Mix 1 Butterfly To Elevator Trim Mix 2 Butterfly Differential Ailevator V-Tail Motor Mix Winglet Multicopter Feature; Gyro Receiver; Receiving Frequency: 2.4Ghz Fasstest System Power Requirement: 3.7 7.4V (Voltage Range 3.5 8.4V) Current Drain: 75Ma External Voltage Port: 0 70V Dc Size: 0.98 X 1.9 X 0.56 (24.9 X 47.3 X 14.3Mm) Weight: 0.38Oz (10.9G) Antenna Length: 5-3/4 (146Mm) Jxs 8/31/15 Ir/Jxs

This Product Was Added To Our Catalog On September 14, 2018