Electronics * | Futaba Mpdx-1 Multi-Prop Decoder (Fca)

The Futaba Mpdx-1 Multi-Prop Decoder Is Used To Expand A Single Receiver Channel Signal, To Up To Eight Channels. Simply Connect The Decoder To The Receiver On Futaba 32Mz, 18Mz, 14Mz, Fx-40, 12Z And 12Fg Systems.

Multi-Prop Channels Have The Following Differences From Normal Linear Channels:

• The Resolution Of The Multi-Prop Channel Is Lower Than That Of The Linear Channel.
• Operating Multiple Multi-Prop Channels Simultaneously May Reduce The Operation Response Of The Multi-Prop Channel.
• Multi-Prop Channels Can Not Use The Mixing Function.

Features:

• Servo Operation Of 8 Channels Is Possible From One Single Channel
• Linear Operation Is Possible
• The Servo Operation Speed Of Each Channel Can Be Set
• Fail Safe Setting Of Each Channel Is Possible
• Operation Control Setting, Direction Of Operation Change, And Travel Adjustment Are Possible For Each Multi-Prop Expanded Channel (Transmitter Side Setting)
• 32Mz Multi-Prop Function Is A Function That Divides One Channel Into Eight Channels And Extends The Number Of Channels. Up To Two Mpdx-1 Can Be Used, And Up To 32 Channels Can Be Expanded As Follows:
• Linear Channel 14 Channels (2 Channels Are Used By Multi-Prop Function)
• On/Off Channel 2 Channels
• Multi-Prop Channels 16 Channels

Specifications: Operation Power Requirement: 4.8 Or 6.0V (4~5 Nicad Batteries) Current Drain: 7.5Ma Number Of Multi-Prop Output Channels: 8 Applicable Modulation Modes: Pcm G3, Pcm1024, Ppm Multiplexing Scheme: Pulse Width Division (Pcm G3, Pcm1024), Time Division (Ppm) Delay Function: Programmable For Each Channel Fail-Safe Function: F/S Function/Hold Function Can Be Selected For Each Channel Dimensions: 29.6 39.3 15.8Mm
Weight: 14.2G

Note: Requires A 4.8V Or 6.0V Battery And Switch.

This Product Was Added To Our Catalog On February 6, 2020